News Updates Saturday 21st Dec 2024 :
  • Welcome to INPRESSCO, world's leading publishers, We have served more than 10000+ authors
  • Articles are invited in engineering, science, technology, management, industrial engg, biotechnology etc.
  • Paper submission is open. Submit online or at editor.ijcet@inpressco.com
  • Our journals are indexed in NAAS, University of Regensburg Germany, Google Scholar, Cross Ref etc.
  • DOI is given to all articles

International Journal of Current Engineering and Technology/Special Issue-4 (March 2016)/

  • Study of Convective Heat Transfer through Micro Channels with Different Configurations
     Pages : 1-6;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.1
    D. S. Ghodake and Rakesh Siddheshwar
    Abstract  | PDF
  • Thermoelectric Power Generation using Waste-Heat Energy from Internal Combustion Engine
     Pages : 7-15;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.2
    D. T. Kashid, S. H. Barhatte and D. S. Ghodake
    Abstract  | PDF
  • Series and Parallel Demand Sharing in Multi-Boiler System
     Pages : 16-19;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.3
    Suyog. S. Bajaj , S. H. Barhatte and S. U. Shinde
    Abstract  | PDF
  • Organic Rankine Cycle and Its Working Fluid Selection-A Review
     Pages : 20-26;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.3.1
    Suyog S. Bajaj, Harshal B. Patil, Gorakh B. Kudal and S. P. Shisode
    Abstract  | PDF
  • Experimental study on heat transfer characteristics of horizontal concentric tube using twisted wire brush inserts
     Pages : 27-32;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.4
    Shravani A. Phule and Kundlik V. Mali
    Abstract  | PDF
  • Performance Enhancement of Refrigeration System using Peltier Module
     Pages : 33-37;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.5
    Suyog S. Bajaj, S. H. Barhatte and Swapnil U. Bhong
    Abstract  | PDF
  • Performance and emission characteristics of waste cooking oil as biodiesel in CI Engine
     Pages : 38-42;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.6
    Jagdeesh S Bali and Channamallikarjun Sankanna
    Abstract  | PDF
  • Ventilation system of Railway, modified to versatile one – Turbo ventilation
     Pages : 43-48;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.7
    Ankit Kalyan Kharde
    Abstract  | PDF
  • CFD Analysis of a Triple Concentric Tube Heat Exchanger having water flowing at three different temperatures
     Pages : 49-52;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.8
    Dilpak Saurabh P., Harshal Khond and Mandar M. Lele
    Abstract  | PDF
  • A Physics based Model for Estimation of EGR Mass Flow Rate
     Pages : 53-62;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.9
    Prashant M. Patane, Sudesh Powar and Shailesh Deshmukh
    Abstract  | PDF
  • A Review Paper on Numerical Simulation of Moving Heat Source
     Pages : 63-66;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.10
    Sudesh B. Powar, Prashant M. Patane and Shailesh L Deshmukh
    Abstract  | PDF
  • Review on Thermoelectric Refrigeration: Materials and Technology
     Pages : 67-71;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.11
    Meghali Gaikwad, Dhanashri Shevade, Abhijit Kadam and Bhandwalkar Shubham
    Abstract  | PDF
  • Door based Power Generation System and Automatic Opening of Door
     Pages : 72-77;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.12
    Hrishikesh Hinge and P. E. Chaudhari
    Abstract  | PDF
  • A Review on Performance and Emission Analysis of Different Vegetable Oil as Biodiesel for CI Engine
     Pages : 78-82;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.13
    Rupesh J. Yadav, Prashant K. Kurve and Pooja J. Pawar
    Abstract  | PDF
  • Effect of Compressor Outlet Pressure on Liquefaction and Refrigeration Capacity
     Pages : 83-84;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.14
    Nishigandha Patel, Supriya Gambhire, Chetan Waykole and Mangesh Saraf
    Abstract  | PDF
  • Thermal Design of Shell & Tube Heat Exchanger for Concentrating Solar Power Application
     Pages : 85-89;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.15
    Shridhar S. Thorat, N. K. Sane, B. S. Gawali, Vinaykumar Kabra and Ajit Gavali
    Abstract  | PDF
  • Analysis and Material Balances of Pig Iron Plant using Energy Audit
     Pages : 90-94;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.16
    Sachin R. Kale, Abhijit A. Kadam, Sudhanwa Kulkarni and Vipul Ruiwale
    Abstract  | PDF
  • Recent Developments in Solar Refrigeration Technology – A Review
     Pages : 95-98;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.17
    Yogesh Musale, Satyawant Patil, Bhakti Chougule, Amruta Kulkarni and Ashish S. Utage
    Abstract  | PDF
  • Eutectic: Phase Change Material for Food Storage
     Pages : 99-101;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.18
    Chaitrali P. Salgaonkar, Rujuta S. Kulkarni, Dheeraj D. Kulkarni
    Abstract  | PDF
  • A Review of Heat Pipe Systems for Heat Recovery and Renewable Energy Application
     Pages : 102-107;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.19
    Vikas Shelke, R.J.Yadav and S.B.Girase
    Abstract  | PDF
  • A Review on Thermal Performance of Different Working Fluids in A Dual Diameter Circular Heat Pipe
     Pages : 108-111;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.20
    Ameya K. Deshpande and S. V. Dingare
    Abstract  | PDF
  • Concept of Blood Diagnosis Bio-Chip
     Pages : 112-114;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.21
    S. P. Wadkar, Shubham S. Mahajan, Anagha P. Joshi, Neeraj Shende
    Abstract  | PDF
  • Design Optimization of Blood Diagnosis Chipusing Computational Techniques
     Pages : 115-119;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.22
    S. P. Wadkar, Shubham S. Mahajan, Anagha P. Joshi and Neeraj Shende
    Abstract  | PDF
  • Motion Study of a Swimmer’s Hand and Forearm in Freestyle Swimming
     Pages : 120-121;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.23
    Shubham S. Mahajan and S. P. Wadkar
    Abstract  | PDF
  • Perpetual Enhancement of Circulating Tumor Cell Using Filtration Microfluidic Chip
     Pages : 122-123;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.24
    Neha Madgulkar and S. P. Wadkar
    Abstract  | PDF
  • Procedure for CFD Analysis of a Triple Concentric Tube Heat Exchanger using ANSYS
     Pages : 124-127;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.25
    Dilpak Saurabh P., Harshal Khond and Mandar M. Lele
    Abstract  | PDF
  • Effect of Acoustic Energy on Fluidization of Ultra-Fine Particle
     Pages : 128-132;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.26
    Gagandeep Singh Theti, Pramod E. Chaudhari and Rupesh J. Yadav
    Abstract  | PDF
  • Heat Transfer Augmentation using Almond Dimple Tubes with Random Arrangement
     Pages : 133-135;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.27
    Shiva K. Vyas, Anand R. Nadgire, Brijesh S. Patil and Sachin R. Kale
    Abstract  | PDF
  • A review on “Experimental investigation of a low-temperature organic Rankine cycle (ORC) engine under variable heat input operating at both subcritical and supercritical conditions”
     Pages : 136-137;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.28
    Aishwarya A. Gavai
    Abstract  | PDF
  • Heat Transfer Enhancement of Circular Heat Pipe with Al2O3 BN/Water Hybrid Nanofluid
     Pages : 138-143;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.29
    Kamthe Swapnil, Pawar Dhananjay , Zurunge Gaurav, Ranade Anand and Kamble D.P.
    Abstract  | PDF
  • Thermoelectric Power Generation using Waste Heat of Automobile
     Pages : 144-148;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.30
    Shrutika Karpe
    Abstract  | PDF
  • Design optimization algorithm for plate heat exchanger
     Pages : 149-155;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.31
    Harshal Khond, Dilpak Saurabh P. and Kundalik V. Mali
    Abstract  | PDF
  • Comparison of Elemental Performance for Stress Concentration Fact
     Pages : 156-159;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.32
    Mrunal Kudale, Nandan Sathe, Shubham Kale, S.P.Wadkar and S.N.Hawaldar
    Abstract  | PDF
  • Homogeneous Charge Compression Ignition (HCCI) Engine Technology-A Review
     Pages : 160-163;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.33
    Shamla A. Mulane and S. D. Limaye
    Abstract  | PDF
  • Convection Heat Transfer from Horizontal Rectangular Fin Array having Triangular Perforations
     Pages : 164-171;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.34
    Dilpak Saurabh P. and S. G.Taji
    Abstract  | PDF
  • A Review on Performance of Air Conditioning System using Two Phase Ejector
     Pages : 172-177;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.35
    Harish Choudhary, B.S.Kothavale and K.V.Mali
    Abstract  | PDF
  • Review on Application of Aluminum Foam in Sound Absorption Technology
     Pages : 178-181;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.36
    Shashikant V. Raut, V. S. Kanthale and B. S. Kothavale
    Abstract  | PDF
  • Performance Evaluation of 0.5 W at 80 K Stirling Cryocooler
     Pages : 182-187;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.37
    Mandar M. Lele
    Abstract  | PDF
  • A Review on Hybrid solar/wind/ hydro power generation system
     Pages : 188-191;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.38
    Bhushan D. Agarkar and Shivprakash B. Barve
    Abstract  | PDF
  • CFD Analysis of Centrifugal Pump’s Impeller of Various Designs and Comparison of Numerical Results for Various Models
     Pages : 192-196;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.39
    Rajiv Kaul
    Abstract  | PDF
  • Study of Performance and Emission Characteristics of Biodiesel Blends of Soybean and Karanja Oil on Twin-Cylinder Diesel Engine Test Rig
     Pages : 197-201;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.40
    Akash K. Ingole, Achuat S. Deo, Ajay K. Ledade, Kunal R. Dhote and Amol D. Pitale
    Abstract  | PDF
  • Development of Water Generation System from Air
     Pages : 202-203;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.41
    Sahil Doshi, Shubham Chaudhari, Saheel Aitwade, Ratan Singh, and C. P. Waykole
    Abstract  | PDF
  • A Review on Heat Pipe for Air Conditioning applications
     Pages : 204-207;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.42
    Nikhil S. Chougule, Tushar S. Jadhav and Mandar M. Lele
    Abstract  | PDF
  • Review on Waste Heat Recovery Techniques in Air Conditioning Application
     Pages : 208-212;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.43
    Krunal R. Meshram, Prashant R. Mahale, Tushar S. Jadhav and Mandar M. Lele
    Abstract  | PDF
  • A Review on Enhancement of Refrigeration Effect of Vortex Tube
     Pages : 213-218;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.44
    Ankita Adana and P.M.Khanwalkar
    Abstract  | PDF
  • Heat Transfer Characteristics of Ventilated Disc Brake Rotor with Diamond Pillars-A Review
     Pages : 219-222;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.45
    Gorakh B. Kudal and Mahesh R. Chopade
    Abstract  | PDF
  • Experimental Investigation of Natural convective flow in Aluminium Open Cell heat exchanger
     Pages : 223-227;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.46
    Rahul Singh Poonia and Mandar M. Lele
    Abstract  | PDF
  • Plasma propulsion for rocket engine using ion thruster
     Pages : 228-230;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.47
    Sanket Pacharne
    Abstract  | PDF
  • A Review on Gun Barrel Erosion
     Pages : 231-235;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.48
    Abhilash A. Putti, M. R. Chopade and P. E. Chaudhari
    Abstract  | PDF
  • Study of R-161 refrigerant as an Alternate Refrigerant to various other refrigerants
     Pages : 236-241;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.49
    Kalpesh N. Kothale, Kundlik V. Mali and S. D. Nimbalkar
    Abstract  | PDF
  • Performance Evaluation of Four Stroke SI Engine with and without Oxyrich Air Energizer at 1000rpm
     Pages : 242-246;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.50
    Nilesh T. Dhokane, Anand R. Nadgire and Savita U. Shinde
    Abstract  | PDF
  • Gear Fault Identification by using Vibration Analysis
     Pages : 247-253;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.51
    Ajanalkar Sagar Shivputra and Ganesh D. Shrigandhi
    Abstract  | PDF
  • Pedal Operated Water Filtration System (Mobifilt)
     Pages : 254-258;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.52
    Sanjay N.Havaldar, Altaf Somani , Anusha Pikle, Yash Siriah and Samiksha Patil
    Abstract  | PDF
  • Modal Analysis of Composite Sandwich Panel
     Pages : 259-264;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.53
    G.D.Shrigandhi and Pradip Deshmukh
    Abstract  | PDF
  • Development of FRP Sandwich Panels for Outer Body of Boat
     Pages : 265-267;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.54
    Vinay B. Ugale, Prashant Kumar and K. K. Singh
    Abstract  | PDF
  • Redesign and Structural analysis of agitator shaft for reactor pressure vessel
     Pages : 268-273;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.55
    Sumit R.Desai, S.Y.Gajjal and Kulloli
    Abstract  | PDF
  • Development of Gear Design Software Package
     Pages : 274-277;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.56
    Shubham Khilari, Harsh Kakashaniya, Ashish Karanje, Varun Jadhav and Sandeep Thorat
    Abstract  | PDF
  • Comparison of several elements and their performances in static and dynamic FEA
     Pages : 278-281;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.57
    Nitesh Bandewar and Sanjay Deshpande
    Abstract  | PDF
  • Study of tensile load carrying capacity of Iso -Truss with two different positions of longitudinal members
     Pages : 282-284;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.58
    Mangesh S. Gavade, S. Roy, S. H. Barhatte and S. S. Mujumdar
    Abstract  | PDF
  • Design and Development of Clamping Fixture for Drilling of Boiler Tube Plate
     Pages : 285-290;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.59
    Sunny N. Shahane, Amol D. Lokhande, Sanjivani R. Bhosale, Amit V. Patil, Neha S. Shirodkar
    Abstract  | PDF
  • Design and Analysis of Cover Handle Bar Top (Injection moulding process)
     Pages : 291-295;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.60
    Ingole Akshay Rambhau, Joglekar Saurabh Ashwinkumar, Jori Prasad Rajendra, Kulkarni Nikhil Narayan and B.D.Patil
    Abstract  | PDF
  • Effect of Heat Treatments on Fatigue Failure and Fracture Toughness of Various Tool Steels – A Review
     Pages : 296-302;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.61
    D. N. Korade, V. M. Dandge, K. V. Ramana, K. R. Jagtap
    Abstract  | PDF
  • Design and Fabrication of Multipurpose Machine for Sugarcane Planting
     Pages : 303-306;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.62
    Vaibhav V. Randive, Siddharam V. Birajdar, Varuneshwar R. Rathod, Bhushan R. Kotkar and Abhijeet R. Mali
    Abstract  | PDF
  • Designing and Optimization of Wheel Assembly of a Formula Student Car
     Pages : 307-320;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.63
    Joijode Vrushabh Umesh and Yadav Abhishek
    Abstract  | PDF
  • Peanut Sheller using Screw Conveyor
     Pages : 321-323;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.64
    Pratima G. Mungase, A.D.Lokhande, Savita T. Mashalkar and Sangita A Soman
    Abstract  | PDF
  • Flexural Analysis of Butt-Joint Prepared by CFRP Windings between two Aluminium Adherend Pipes using ANSYS
     Pages : 324-332;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.65
    Shailesh L. Deshmukh, Prashant Kumar, R. N. Ladhave and Prashant Patane
    Abstract  | PDF
  • Review of Driver Seat Suspension using MR Fluid Damper
     Pages : 333-336;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.66
    Swapnil Hatwalane,B. S. Kothavale, Akshay Ohol and Girish Palve
    Abstract  | PDF
  • Design and Implementation of Automatic Emergency Braking System
     Pages : 337-342;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.67
    Sandeep Thorat, SanketThorve, Jaydatta Upase and Agampal Singh Dhupar
    Abstract  | PDF
  • Design of Wet Leak Test Machine for Radiators: A Study
     Pages : 343-346;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.68
    Darshan Dabholkar, Dipak Shenvi, Nitinkumar Anekar,Onkar Joshi
    Abstract  | PDF
  • Design of Nozzle and Fin Locking Unit for MRECM Rocket: A Study
     Pages : 347-351;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.69
    Arjun Ogale, Omkar Marathe, Saurabh Misal and Nitinkumar Anekar
    Abstract  | PDF
  • Development of Spring Loaded Abrasive Float Polishing Machine Setup (SLAFP)
     Pages : 352-355;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.70
    Asmita A Pardeshi andV S Kanthale
    Abstract  | PDF
  • Analysis and Simulation of Elastomeric Strut Mount and its applications for Failure Investigation
     Pages : 356-360;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.71
    Nikita Hardikar, Aadish Kulkarni, Adwait Telang and Vilas S.Kanthale
    Abstract  | PDF
  • Vibration Analysis of Composites
     Pages : 361-364;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.72
    Prashant Mahale, Shrutika Karpe, Shubhada Khedkar and Kajal Khule
    Abstract  | PDF
  • Comparison of harmonic analysis of cantilever beam using different finite elements
     Pages : 365-367;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.73
    Shubham Kale, Kunal Lohar, Nandan Sathe, S. P. Wadkar and Dr. S. V. Dingare
    Abstract  | PDF
  • Automated Bumper for Damage reduction with Emergency Braking Mechanism
     Pages : 368-371;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.74
    Aditya Gandhi, Amey Deshmukh Rahul Aniyankunju and Prathamesh Kalasakar
    Abstract  | PDF
  • Experimental Study of Several Tools for Surface Roughness obtained using Magnetorheological Abrasive Flow Finishing Process
     Pages : 372-376;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.75
    Vilas S. Kanthale and D. W. Pande
    Abstract  | PDF
  • Design and Development of Solar Hybrid Bicycle
     Pages : 377-381;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.76
    Kartik S Mishra, Shubham V Gadhawe, Dhiraj C Chaudhari, BhupendraVarma and S. B. Barve
    Abstract  | PDF
  • Review paper on Design and Development of Muffler to Optimize Transmission Losses
     Pages : 382-387;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.77
    Sandeep G Thorat, B S Kothavale, Swapnil S Hatwalane and Dhiraj Bhaskar
    Abstract  | PDF
  • Experimental Evaluation of MR Brake using rollers
     Pages : 388-390;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.78
    Saurabh Kumar, Dattatraya Zore, Tejas Bhalerao and Vinmay Jagtap
    Abstract  | PDF
  • Semi-Active Suspension system with M.R. Damper for car seat vibration- A Review
     Pages : 391-394;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.79
    Shaunak P Mhatre, Swapnil Hatwalane, Sandeep Thorat and B S Kothavale
    Abstract  | PDF
  • A Review on Effect of Variation in Material Composition and Structural Dimensions on Vibrational Behavior of Composite Materials
     Pages : 395-399;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.80
    Rushvika Pawar, Gaurav Pawar and Prashant Mahale
    Abstract  | PDF
  • A Review of half-car model vibration system using Magneto rheological Dampers
     Pages : 400-404;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.81
    Sumedh Marathe, Swapnil Hatwalane, Sandeep Thorat and Nilesh Dhokane
    Abstract  | PDF
  • Design and Development of Agriculture Sprayer Vehicle
     Pages : 405-408;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.82
    Siddharth Kshirsagar, Vaibhav Dadmal, Prashant Umak, Govind Munde and P. R. Mahale
    Abstract  | PDF
  • A Review on Different Micromixers and its Micromixing within Microchannel
     Pages : 409-413;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.83
    Supriya Gambhire, Nishigandha Patel, Gajanan Gambhire and Sachine Kale
    Abstract  | PDF
  • Noise Level Reduction in Machine Shop using Kaizen Techniques
     Pages : 414-416;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.84
    Mihir Khedkar, Aditya Gandhi, Dhanashri Shevade, Meghali Gaikwad and Gautam Narwade
    Abstract  | PDF
  • Extra Ordinary Properties of Titanium Useful in Various Sectors and Enlightenment of “The Kroll Process”
     Pages : 417-419;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.85
    Mali Bhushan Ishwar
    Abstract  | PDF
  • Design and Development of Cost Effective Automatic Machine for Powder Packaging
     Pages : 420-424;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.86
    M. R. Saraf, V. V. Ruiwale, V. V. Kulkarni and S. M. Kulkarni
    Abstract  | PDF
  • Air Compressor Crankshaft Machining Feasibility
     Pages : 425-427;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.87
    Aditya B. Rajopadhye and S. P. Wadkar
    Abstract  | PDF
  • Value Stream Mapping: A Case Study of an Assembly Line in an Automotive Industry
     Pages : 428-430;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.88
    Meghali Gaikwad, Dhanashri Shevade and Bhat Prasad Krishna
    Abstract  | PDF
  • Design of Agricultural Ploughing Tool
     Pages : 431-433;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.89
    Tejas P Phadnis, Apoorv N Mulay, Anand S Bhujbal and Gautam J Narwade
    Abstract  | PDF
  • Approach for Mass Notification Device Testing
     Pages : 434-436;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.90
    Brijesh Patil, Shiva Vyas, Anand Nadgire and Vaibhav Kulkarni
    Abstract  | PDF
  • Process Automation of Chiller Plant for Welding Sub-Assembly
     Pages : 437-440;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.91
    Vaibhav V. Kulkarni, Kaustubh Joshi, Vishwesh Kugaonkar, Prasad Honrao and Aditya Patki
    Abstract  | PDF
  • Static Analysis of Manipulator Components of Chiller welding fixture using Finite Element Method
     Pages : 441-443;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.92
    Vaibhav V. Kulkarni, Kaustubh Joshi, Vishwesh Kugaonkar, Prasad Honrao, Aditya Patki
    Abstract  | PDF
  • Study of Neuroarm and Force Sensing Grippers in Robo-Assisted Neurosurgery
     Pages : 444-447;http://dx.doi.org/10.14741/Ijcet/22774106/spl.4.2016.93
    Mahajan Vivek* and S.P Wadkar
    Abstract  | PDF
 
Call for Papers
  1. IJCET- Current Issue
  2. Issues are published in Feb, April, June, Aug, Oct and Dec
  3. DOI is given to all articles
Facts and figures
Conferences Proceedings
  1. MECHPGCON, MIT College of Engineering, Pune, India
  2. AMET, MIT College of Engineering, Pune, India
  3. International Conference on Advances in Mechanical Sciences
  4. International Symposium on Engineering and Technology
  5. International Conference on Women in Science and Engineering

  • Inpressco Google Scholar
  • Inpressco Science Central
  • Inpressco Global impact factor
  • Inpressco aap

International Press corporation is licensed under a Creative Commons Attribution-Non Commercial NoDerivs 3.0 Unported License
©2010-2023 INPRESSCO® All Rights Reserved

Back To Top