Experimental investigation of Wire Electrical Discharge Machining (WEDM) Process Parameters on SS304 using Taguchi method
Pages : 504-507, DOI: https://doi.org/10.14741/ijcet/v.8.3.2
Download PDF
Abstract
WEDM (Wire Electrical discharge machining) is a nonconventional machining processes used in complicated shapes with high accuracy which are not possible with other conventional methods .Stainless steel 304 is used in present experimental work. Experiments are completed using Taguchi’s method with L9 orthogonal array .The aim of this work is to optimize the WEDM process parameters by considering input parameters are pulse on time , pulse off time ,peak current and wire feed and experiments are conducted with help of input parameters at three levels and response output parameters are MRR (Material removal Rate) and Surface Roughness (SR).Setting of parameters using by Taguchi’s method.
Keywords: WEDM, Taguchi’s method, SS304, L9 Orthogonal array, MRR,SR.
Article published in International Journal of Current Engineering and Technology, Vol.8, No.3 (May/June 2018)
MECHPGCON, MIT College of Engineering, Pune, India
AMET, MIT College of Engineering, Pune, India
International Conference on Advances in Mechanical Sciences 
International Symposium on Engineering and Technology
International Conference on Women in Science and Engineering
