Design and Development of Universal Test Bench for Testing Valves of Automobile Braking System
Pages : 104-110
Download PDF
Abstract
University Test Bench has been successfully designed and developed for testing valves of brake system. The test bench frame was fabricated from two hollow aluminum sections of 40mm X 80mm and 40mm X 40 mm respectively. The overall dimension is 1850mm × 1750mm × 660mm, the bench include panel of size 850mm × 1850mm × 300mm size to accommodate tubes, pressure gauges, ball valves, FR uni, and quick coupling connectors, down compartment 630mm × 850mm × 1850mm size to accommodate 40 L, 5 L and 0.75 L air reservoir tank.
Keywords: Brake system, test bench, relay valve and pressure proportional valve
Article published in International Journal of Advance Industrial Engineering , Vol.5, No.3 (Sept-2017)
MECHPGCON, MIT College of Engineering, Pune, India
AMET, MIT College of Engineering, Pune, India
International Conference on Advances in Mechanical Sciences 
International Symposium on Engineering and Technology
International Conference on Women in Science and Engineering
