A Review on Power Generation and Making Pure Water using Acetylene Gas
Pages : 571-573
In the present study calcium carbide and pure water was used for forming the acetylene. Acetylene was used as main fuel which is stored in a tank, which is supplied to gas turbine then power produced in device. This power is utilized to generate electricity with the help of electricity generator and gear mechanism. This produced electricity is going through following stages: 1] To induction boiler which consist the saline water, which get vaporized due to running of boiler. 2] Then this superheated steam goes upward through electric heat pipe due to low density. 3] This superheated steam was passed some distance by heat pipe. Afterwards co-generation plant is situated, which is working on the superheated steam. 4] this steam is passed again in a cogeneration where it generates electricity again 5] After that this superheated steam is converted into water By condenser.6] this water is used to drought area and required purposes.
Keywords: Acetylene, Gas-Turbine, Electric Generator, Induction Boiler, Co-Generation Plant, Condenser
Article published in International Journal of Current Engineering and Technology, Vol.7, No.2 (April-2017)